Suburbs we cover here: Chitungwiza, Bindura, Marondera, Chinhoyi
Harare is our busiest city and the work splits three ways: industrial shutters through Msasa, Graniteside, Workington, Southerton and Willowvale, shopfront curtains in the CBD and the suburban centres, and garage doors and security shutters out in the low-density north.
What we see in Harare
The industrial stock is where the volume is. Warehouse and workshop bays here are cycled hard all day, often with a personnel door set into the curtain, and the slat gauge and drive have to be specified for that traffic rather than for the quote. We survey before we build because openings in this stock are rarely the size the drawing says.
On the residential side the constant is power. Almost every domestic quote we write in Harare includes a manual override as standard, and a battery backup often enough that we price it as an option on the same sheet rather than waiting to be asked.
Getting on site
Industrial sites are booked with the works manager for the day; CBD shopfronts are done outside trading hours so the frontage is open again the next morning. Suburban installations are straightforward and usually finish inside a day.
Motors, backup and power interruptions
A door that strains, reverses part-way or stops halfway is normally reporting a spring past its cycle life rather than a failing motor. On a high-traffic Harare bay we check the cycle count and the balance before replacing any drive.
Repairs on any make
Any make, any age. Most Harare repairs are a spring, a cable, a guide or a bottom rail knocked out of line by a forklift or a delivery vehicle, and the common parts travel on the van.
What it costs
Price follows the opening size, the slat specification, the duty the door takes and whether it is manual or motorised. A 2.4m domestic garage and a 6m warehouse bay are not the same product, so we quote per opening after the survey.
How soon we can be there
A survey in Harare is usually within 48 hours and a breakdown is attended same-day. Manufacture is at our own works, so a made-to-measure door does not carry a long lead time.
Getting a quote
Send the opening size and a photograph. For multiple openings, a simple schedule of widths and heights is enough to start.
Roller shutter and industrial door services in Harare
Roller Shutter Doors in Harare
Every curtain we hang in Harare is manufactured to the measured opening rather than cut down from a stock size, in galvanised, perforated, transparent or powder-coated finishes.
Roller Shutter Door Installation in Harare
Installation in Harare is handled by our own crews, working to your hours where an opening cannot be closed during trading.
Roller Shutter Door Repairs in Harare
Most of our Harare work is on doors we did not fit: jumped curtains, worn barrel bearings, broken springs, frayed cables and rusted bottom rails.
Roller Door Repairs in Harare
A roller door in Harare can normally be repaired rather than replaced — individual slats, guides and gear are all replaceable while the rest of the curtain stays.
Industrial Roller Shutter Doors in Harare
Heavy-duty curtains for Harare warehouses, workshops and loading bays, braced for the span and specified for the cycle count.
Industrial Roller Shutter Door Repairs in Harare
When an industrial shutter stops in Harare the building stops with it, so we attend same day and repair on the first visit wherever parts allow.
Roller Shutter Door Manufacturers in Harare
We are a manufacturer, not a reseller, so a door supplied to Harare can be matched, repaired and re-slatted years later from the same works that built it.
Industrial Door Manufacturers in Harare
As industrial door manufacturers we build to the Harare site rather than to a catalogue, including non-standard spans and heights.
Industrial Door Repairs in Harare
Industrial door repairs across Harare: straightened guides, replacement slats, new barrel bearings, rebuilt bottom rails and motor replacements.
Roller Shutter Door Servicing in Harare
A service contract in Harare catches the dry guide and the worn bearing before either becomes the callout that stops your day.
Emergency Roller Shutter Door Repairs in Harare
A door stuck open in Harare is a security problem and one stuck closed is lost trading, so we run a 24-hour standby for both.
Need a door in Harare?
Send the opening size and your suburb. A consultant calls you back, usually within two working hours — or call the standby number if the door has already stopped.
What customers say
Reviews from Harare and nearby
Dock door back up the same morning
Our main dispatch door jammed at 6am with trucks already queuing. They had a technician on site before 8 and the door was running by mid-morning. They also told us the spring was the wrong rating for how often we cycle it, which nobody had mentioned in four years.
Werner B.Logistics operator, Zimbabwevia Google
Straight answer instead of a sales pitch
I expected to be told I needed a new door. Instead they replaced three slats and the bottom rail and charged a fraction of what I had budgeted. The door has been fine since.
Riaan V.Engineering works, Zimbabwevia Google
Galvanised made the difference
Our previous doors were rusting within two years of being painted. They replaced all six in galvanised with marine fixings and explained exactly why. Three years on there is barely a mark on them.
Shanice P.Food manufacturer, Zimbabwevia Google
Our work
Doors we have built and fitted
Common questions
Roller doors in Harare
Same-day where we can reach you. We run a standby number after hours, and an industrial door that will not close in Harare goes to the front of the list because the premises cannot secure until it does.
Repairs often, installations no. A repair is usually a spring, a cable or a guide and the parts are on the van. An installation follows a measured survey, because a door built to a drawing rather than the actual Harare opening will bind within a season.
Yes. Every motorised door we install has a manual override, and we can fit a battery backup so the door keeps operating normally through an outage. On Harare sites we quote it as an option rather than waiting to be asked.
Related
Also worth a look
Roller Shutter Doors Hwange
Coal, power plant and doors that live in dust
Industrial roller shutter doors in Hwange — colliery and power station workshops, plant doors and stores, specified for coal dust.
Roller Shutter Doors Kadoma
Mid-sized industry, cotton and gold
Roller shutter doors in Kadoma — factory and workshop bays, storage sheds, shopfront curtains and garage doors.
Roller Shutter Doors Kariba
Lake heat, humidity and corrosion
Roller shutter doors in Kariba — lodge and marina back-of-house, stores and workshops, specified against heat and corrosion.