Suburbs we cover here: Kwekwe, Chinhoyi, Gweru, Chitungwiza
Kadoma carries mid-sized industry — cotton and textile heritage, gold on the outskirts, and the workshops and storage that go with both. The doors are workhorses rather than showpieces.
What we see in Kadoma
Factory openings here are often original to the building and were built for smaller vehicles than the ones using them now. Widening is common, and we survey while the opening is being formed so the lintel and fixings are right the first time.
Storage and stockholding is the other constant. Those doors are opened less often but matter more when they fail, so we specify for security and seal rather than for cycle life.
Getting on site
Yards are workable. We book the bay with the site and split larger jobs across visits where a store cannot be emptied in one go.
Motors, backup and power interruptions
On a low-cycle store door, a well-balanced manual curtain often beats a motorised one. We will say so rather than quote automation you do not need.
Repairs on any make
Any make, any age. Springs, cables, guides and bottom rails cover most Kadoma repairs and the common parts are on the van.
What it costs
Price follows the opening size, the slat specification and what the fixings go into. Widening an opening changes the figure materially, so we quote after the survey.
How soon we can be there
A survey in Kadoma is usually within 48 hours and breakdowns are attended same-day where we can reach you.
Getting a quote
Send the opening size, and tell us if the opening is being changed. That moves the price most.
Roller shutter and industrial door services in Kadoma
Roller Shutter Doors in Kadoma
Every curtain we hang in Kadoma is manufactured to the measured opening rather than cut down from a stock size, in galvanised, perforated, transparent or powder-coated finishes.
Roller Shutter Door Installation in Kadoma
Installation in Kadoma is handled by our own crews, working to your hours where an opening cannot be closed during trading.
Roller Shutter Door Repairs in Kadoma
Most of our Kadoma work is on doors we did not fit: jumped curtains, worn barrel bearings, broken springs, frayed cables and rusted bottom rails.
Roller Door Repairs in Kadoma
A roller door in Kadoma can normally be repaired rather than replaced — individual slats, guides and gear are all replaceable while the rest of the curtain stays.
Industrial Roller Shutter Doors in Kadoma
Heavy-duty curtains for Kadoma warehouses, workshops and loading bays, braced for the span and specified for the cycle count.
Industrial Roller Shutter Door Repairs in Kadoma
When an industrial shutter stops in Kadoma the building stops with it, so we attend same day and repair on the first visit wherever parts allow.
Roller Shutter Door Manufacturers in Kadoma
We are a manufacturer, not a reseller, so a door supplied to Kadoma can be matched, repaired and re-slatted years later from the same works that built it.
Industrial Door Manufacturers in Kadoma
As industrial door manufacturers we build to the Kadoma site rather than to a catalogue, including non-standard spans and heights.
Industrial Door Repairs in Kadoma
Industrial door repairs across Kadoma: straightened guides, replacement slats, new barrel bearings, rebuilt bottom rails and motor replacements.
Roller Shutter Door Servicing in Kadoma
A service contract in Kadoma catches the dry guide and the worn bearing before either becomes the callout that stops your day.
Emergency Roller Shutter Door Repairs in Kadoma
A door stuck open in Kadoma is a security problem and one stuck closed is lost trading, so we run a 24-hour standby for both.
Need a door in Kadoma?
Send the opening size and your suburb. A consultant calls you back, usually within two working hours — or call the standby number if the door has already stopped.
What customers say
Reviews from Kadoma and nearby
Dock door back up the same morning
Our main dispatch door jammed at 6am with trucks already queuing. They had a technician on site before 8 and the door was running by mid-morning. They also told us the spring was the wrong rating for how often we cycle it, which nobody had mentioned in four years.
Werner B.Logistics operator, Zimbabwevia Google
Straight answer instead of a sales pitch
I expected to be told I needed a new door. Instead they replaced three slats and the bottom rail and charged a fraction of what I had budgeted. The door has been fine since.
Riaan V.Engineering works, Zimbabwevia Google
Galvanised made the difference
Our previous doors were rusting within two years of being painted. They replaced all six in galvanised with marine fixings and explained exactly why. Three years on there is barely a mark on them.
Shanice P.Food manufacturer, Zimbabwevia Google
Our work
Doors we have built and fitted
Common questions
Roller doors in Kadoma
Yes. Doors are made to your measured opening rather than to stock sizes, up to roughly 8 metres wide depending on the slat and drive. Wide bays are normal work for us in Kadoma.
The building work is a builder’s job, but we survey while the opening is being formed so the lintel, fixings and door specification are right first time. A wider curtain needs a heavier barrel and a bigger drive, and we quote that properly.
Yes, and on a bay cycled dozens of times a day it is worth it. Spring life is measured in cycles, so a door opened forty times a day wears faster than one opened twice — which is exactly what a service contract is for.
Related
Also worth a look
Roller Shutter Doors Kariba
Lake heat, humidity and corrosion
Roller shutter doors in Kariba — lodge and marina back-of-house, stores and workshops, specified against heat and corrosion.
Roller Shutter Doors Kwekwe
Steel, gold and doors that take a beating
Industrial roller shutter doors in Kwekwe — steel and mining workshop bays, plant doors and heavy-duty shutters, repaired on any make.
Roller Shutter Doors Marondera
Tobacco floors, schools and agriculture
Roller shutter doors in Marondera — tobacco grading and curing sheds, school and institutional stores, shopfront curtains and garage doors.